[Elecraft] SignaLink USB and K2

[Don Wilhelm]

John,

My fixed audio output is just what it says - it provides a level of 
audio OUTPUT from the K2 independent of the setting of the AF gain control.
It does nothing for the audio INPUT.  The input (to the mic jack) is 
what is depicted on the Tigertronics website.  Note that the mic wiring 
shown assumes that you have configured your K2 to use the Elecraft (or 
Kenwood) microphone pinout.  If you are using a microphone that is wired 
for anything other than Elecraft or Kenwood, you will have to alter the 
wiring of the SignalLink to match your mic wiring.

73,
Don W3FPR

John Shadle wrote:
> Does anyone have tips on running the SignaLink USB (not the SL-1+) 
> with a K2? It seems from the Tigertronics site that the 8-pin round 
> mic connector is used between the radio and the SignaLink.
>
> http://www.tigertronics.com/sl_wirebm.htm#Elecraft
>
> But, I thought that the reason folks installed the fixed audio output 
> mod (detailed on W3FPR's web pages) was to improve PSK and other 
> digital modes.
>
> If someone could offer some clarification on this I would greatly 
> appreciate it (especially those who are using the SignaLink USB with a 
> K2).
>