[Elecraft] PLL Problems

[Michael Steel]

I am having problems with my K2 kit: S/N 030xx (bought used unassembled).

I am in alignment Test II portion of assembly, and I am having the following problems:

My PLL is reading a frequency between 04255-04265 (jumping fastly between them as well) at TP3.

At other points (including U4 pin 1) it is reading 12010.52 and is very steady.  

I have double checked all the components that were installed, but I had no luck there.  Does anyone have any advice on what might be wrong, or at least what area of components might be causing this?  

Thanks in advance!

Mike, N8VDM