[Elecraft] KAT3 tuning per Antenna

[Don Wilhelm]

David,

It still works the same - tune the KAT3 (or KAT2) output that is to 
connect to the autotuner into a dummy load on each band.  Thereafter, do 
not press TUNE when that antenna is selected.
If you need to provide RF to tune the external autotuner, reduce the 
power if necessary and press the key.

I guess there is utility for a bypass mode on one antenna port for those 
who use an external autotuner which requires RF power for tuning, but I 
cannot think of any other instance.

73,
Don W3FPR

David Ferrington, M0XDF wrote:
> I have an external SGC to a long wire, it tunes up on every band. I plan on
> putting up some form of non-specific dipole so I only need to tune that.
> Apart from not knowing if the KAT3 could handle the long wire, the tuner is
> external to keep the RF out the shack. Therefore I would like to be able to
> control tuning on the ANTs independently.
>
>   
>