[Elecraft] AGC question

[Don Wilhelm]

Larry,

This is a frequently asked question - and it occurs when the 8 volt 
supply rail is on the low side of its tolerance range.  If you cannot 
get it up to 3.8, then leave it set at the highest setting.

73,
Don W3FPR

Larry Naumann wrote:
> I am building a K2 and when I try to adjust the AGC voltage the most I can get is just under 3.8 volts, about 3.7 is what I can get. Is this okay or do I have a problem somehwere?
> Thanks
> Larry
>
>