[Elecraft] KX1 speaker output with superimposed oscillation

[Francisco Barros]

Hi Dave,

Thanks to you.
IHope Bob can tell us, with the modeling of the LM386, why this strange 
behaviour.
>From the knowledge point of view, the technique "try and error" is not the 
best way, we would like to know more... .
Now, my KX1, at the LM386's speaker output, pin 5, has the original RC 
network (10 Ohm + 100 nF) to ground plus one 68 nF to ground also.
I even tried to put the 68 nF in parallel with the original 100 nF but it 
did not worked. Neither with a value of 100 nF, so finally I installed the 
68 nF capacitor directly to the output and ground, allways with short leads 
(I learned this after several years working with RF techniques :)).

73,
Paco

_________________________________________________________________
Grandes éxitos, superhéroes, imitaciones, cine y TV... 
http://es.msn.kiwee.com/ Lo mejor para tu móvil.