[Elecraft] K2 - Low output during initial TX alignment

[JT Croteau]

On 9/4/07, Don Wilhelm <w3fpr at embarqmail.com> wrote:
> You should have zero ohms between the end of R54 and the end
> of R53 (the ends that are connected to the T2 winding) - if not, T2
> is not well tinned and soldered

Well, I am showing 12 ohms so I guess I'll have to take another look
at this bugger.

Thanks

-- 
JT Croteau, N1ESE - Manchester, NH