[Elecraft] Memory sticks

[Dick Dievendorff]

It's described in the K3 Utility Help file, look for "Manual File Transfer".

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of David Fleming
Sent: Thursday, November 29, 2007 11:40 AM
To: Doug Faunt N6TQS +1-510-655-8604; elecraft at mailman.qth.net
Subject: Re: [Elecraft] Memory sticks

You can access the firmware files using your web
browser.

ftp://ftp.elecraft.com/K3/firmware/

David, W4SMT

--- Doug Faunt N6TQS +1-510-655-8604 <faunt at panix.com>
wrote:

> I recall this discussion lately, but in looking
> around, I find I don't
> locate the information necessary to actually
> separate the two functions.
> Perhaps if the procedure were more visible, there'd
> be less confusion.
> 
> I can't locate the sizes of the firmware updates,
> either.
> 
> 73, doug
> 
>    Date: Thu, 29 Nov 2007 11:16:42 -0800
>    From: Vic K2VCO <vic at rakefet.com>
> 
>    Geoffrey Mackenzie-Kennedy wrote:
>    > The lack of a computer could be resolved, it's
> getting the internet 
>    > connection in the remote area that's the
> problem. The memory sticks used 
>    > by our daughter are about a couple of inches
> long, USB connector, can 
>    > store a lot of music, photos and other data and
> are not expensive.
> 
>    As long as you have a computer at the remote
> location on which to run 
>    the K3 Utility, the firmware files can be
> downloaded to the memory stick 
>    at a location which does have internet service.
> Then you could take it 
>    to your remote location, and plug it into the
> computer which could 
>    transfer the firmware to the K3.
> 
>    The utility has the option of downloading the
> files from Elecraft's 
>    server, or of using files stored on the local
> computer (including on a 
>    memory stick, CD, etc.).
>    -- 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
> 
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com