[Elecraft] [K3] Can you turn a filter off

[David Wilburn]

It is my understand, from previous posts, that by adjusting the width
you are engaging appropriate filters.  As example, if you have a 2.7k,
and a .5k, and your width is set to 1k, then the 2.7k is in use, and
the .5k is not.  On the other hand, if you take your width down to, or
below .5k, they the 2.7k filter is off and the .5k filter is on.

I do not have a K3, but this is what I understand from previous posts.
I'm sure I will receive an "alignment" if I am off a bit. ;^)
-  

David Wilburn
k4dgw at k4dgw.com
K4DGW
K2 S/N 5982


On Tue, 2007-11-27 at 11:25 +0000, David Ferrington, M0XDF wrote:
> Whiling away the hours waiting for the confirmation email...
> Having just purchased a 1.8 filter to go with my 400 & 2.8, a thought
> occurred to me (they do sometimes), in order to do A/B comparisons once I
> have my K3, can you leave a filter in place, but turn it 'off' via config
> menu, so the K3 effectively ignores it?