[Elecraft] Re: K2/100 to external Ten-Tec QSK amp

[Joe-aa4nn]

Ten-Tec Titan has on its back panel RCA jacks for
Key-in and Key-out.  For years I have run the
following configuration.
Output from my keyer goes into the Titan Ken-in.
Output from the Titan Key-out goes into K2 Key-in.

This keys the Titan first, getting it ready to transmit,
after which the keying line to the K2 is activated.

I have also used the PA Key out from K2 to a PTT
input on some amps, like Tokyo Hi-Power.  Works

de Joe, aa4nn

-Tec Centurion and Ten-Tec Centaur have two options for
> inter-connection.... first is the single control T/R line but that won't
> support QSK (at least I don't think so), they also support KEY IN and
> KEY OUT lines for full QSK with Ten-Tec rigs (like my Orion or my
> Pegasus) but I can't see how I would use those with the Elecraft. Anyone
> out there using their K2/100 with a Ten-Tec QSK amp and if so how are
> you connecting the two together?
> 
> 73,
> 
> Jerry, KG6TT
>