[Elecraft] Filter Placement in K3

[Greg]

Hi Roy,

Yes..this is fine.  But take care when setting the filter parameters in the
CONFIG menu.  Also, when looking down into the radio with the front facing
you, slot 1 is on the right and slot 5 is on the left.

73
Greg
AB7R


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net]On Behalf Of Roy Morris
Sent: Saturday, November 17, 2007 9:39 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Filter Placement in K3


As long as the roofing filters are placed in bandwidth order, can filter
slots be bypassed in anticipation of placing filters in the slots later?
For example:

Slot #1 Not used - reserved for FM filter
Slot #2 6Khz
Slot #3 2.7 Khz
Slot #4 Not used - reserved for future filter
Slot #5 .5Khz

Roy Morris  W4WFB
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com