[Elecraft] KPA100 first test question

[Dave Van Wallaghen]

Hi Werner,

I have the same setup and really like it. It is nice to be able to grab my
basic K2 and go out into the field when I want and then come back and run
QRO with the plugging in of a few cables.

My guess is you could test it in the ECS enclosure, but, as Elecraft does
not directly support running the KPA100 in an EC2 enclosure with the KAT100,
I think I would "do it by the book" and run the test and setup with your K2.
This way, you will know for sure that all is working when you go to move it
into the EC2 and you will be able to get help for any problems with the
KPA100 testing as well as the move into the EC2.

Just my 0.02 and good luck.

73,
Dave W8FGU

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of Werner Furlan
> Sent: Monday, November 12, 2007 12:37 PM
> To: Elecraft Mailingliste
> Subject: [Elecraft] KPA100 first test question
> 
> hello all,
> 
> I am currently building the KPA100 and I plan to put it into the EC2
> where already the KAT100 resides. I am on page 24 of the manual now,
> where I should test the KPA100 board and attach it to the K2.
> 
> Now my question: is it also possible to attach it to the KAT100 where it
> would be when finished to do the tests?
> I'd connect the K2 to the KAT100 and the KPA100 board to the KAT100.
> Is this reasonable or should I open the K2 for the test?
> 
> 
> PS: I have to thank Scott from the parts supply for his instant help
> with a broken toroid and a missing capacitor in the update kit. Thanks
> also to Don Wilhelm for pointing me on this. The service is really
> outstanding.
> 
> 73! Werner oe9fwv
> 
> --
> Dr. Werner Furlan
> mobile: +43 (0)664 6340014
> fone: +43 (0)5522 75013
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com