[Elecraft] [K3] Assembly Manual

[Stan Rife]

	When trying to download the K3 Assembly Manual with the following
description,  (8 MB) K3 Assembly Manual (Rev B, 10/28/07), I always get the
3.61 MB web version. Is the 8MB version being overhauled?


Stan Rife
W5EWA
Houston, TX
K2 S/N 4216

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Ed Muns
Sent: Saturday, November 10, 2007 8:00 PM
To: AJSOENKE at aol.com
Cc: elecraft at mailman.qth.net
Subject: RE: [Elecraft] [K3] KRX3 & KBPF3 Question

The KBPF3 mounts on the KRX3 just as it does on the RF board.  The KRX3 is
basically the RX portion of the RF board that mounts above the RF board,
with enough space to clear the boards plugged into the RF board (KBPF3,
KNB3, etc.).

A KBPF3 can mount on either or both of the RF board and the KRX3
simultaneously in the same K3.

73,
Ed - W0YK 

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of 
> AJSOENKE at aol.com
> Sent: Saturday, 10 November, 2007 17:35
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] [K3] KRX3 & KBPF3 Question
> 
> I'm confused, the KBPF3 is a fairly large board that mounts 
> on the RF board and operates in bypass to the ham band only 
> BPF. Has anyone seen the KRX3 schematic or an image that 
> tells the full story?
>  
> Al WA6VNN
>  
> In a message dated 11/10/2007 3:23:21 P.M. Pacific Standard 
> Time, w0yk at msn.com writes:
> If you have two KBPF3s.   ;>)
> 
> Ed
> 
> Wayne Burdick wrote:
> > 
> > Or both, if you  want general-coverage receive on both.
> > 
> > Ed Muns wrote:
> >  
> > >> In the long run I plan on using the KFL3B-FM in the 
> primary RX  and 
> > >> the KFL3A-6K in the secondary RX for listening to
> >  broadcast stations. 
> > >> Afaik this would require the KBPF3 to be  installed on the
> > KRX3 board
> > >> and not on the main RF  board. As a clone of the main 
> receiver this 
> > >> should be  possible, shouldn't it? Did I overlook something?
> > >
> > > That  is correct.  The KBPF3 can be installed on either receiver.
> >  
> > Wayne
> > N6KR
> > 
> > ---
> > 
> >  http://www.elecraft.com
> >  
> 
> _______________________________________________
> Elecraft mailing  list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to  the list.
> Subscriber Info (Addr. Change, sub, unsub  etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft     
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page:  http://www.elecraft.com
>  
> 
> 
> 
> ************************************** See what's new at 
> http://www.aol.com _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com