[Elecraft] K3 FIRMWARE UPDATE - non wintel software?

[David Ferrington, M0XDF]

Ah - thanks - so glad I did order the KUSB


On 7/11/07 15:26, "Joe Subich, W4TV" <w4tv at subich.com> sent:

> 
>> And hopefully, my microHAM Digikeyer will act as a straight through.
> 
> No.  DigiKeyer implements the control port in software.  Don (MLDX)
> and Chen (cocaModem/uH Router) write to the hardware specification.
> There is no virtual serial port interface in any of the OSX or
> LINUX software. 
> 
> In spite promises from several LINUX developers (who have been provided
> both hardware and documentation) nobody has created a LINUX or OSX
> equivalent to Router's virtual serial port interface.  Rumor has it that
> Router will run under VMware or Parallels but I have not been able to
> confirm that.   
> 
> 73, 
> 
>    ... Joe Subich, W4TV
>        microHAM America
>        http://www.microHAM-USA.com
>        http://groups.yahoo.com/group/microHAM
>        support at microham.com
>> YES! - THANK YOU  David / Elecraft.
>> 
>> While I can use the Wintel laptop, having it on OSX will be
>> so much less
>> hassle. I assume that will be 10.4 and up. And hopefully, my
>> microHAM Digi
>> keyer will act as a straight through.
>> (yes I have the KUSB on order).
>> 
>> 
>> On 7/11/07 02:40, "David Fleming" <dflem at yahoo.com> sent:
>> 
>>> OS X and Linux versions of the K3 Utility are
>>> currently under development!
>>> 
>>> David, W4SMT
-- 
A person usually has two reasons for doing something: a good reason and the
real reason. -Thomas Carlyle, historian and essayist (1795-1881)