[Elecraft] Radio Shack Solder ??
Jack Smith
Jack.Smith at cliftonlaboratories.com
Sat May 26 17:56:59 EDT 2007
Went to the basement and retrieved the empty spool (never throw things
like that out - always good for odds and ends of wire). It's 62/36/2,
with the 2% being silver. Radio Shack part number 64-035, and it's still
shown in the on-line catalog at $3.99 for a 1 oz spool. 1 oz of solder
lasts a long time. I do a fair bit of building and that's 6 months worth
or more for me.
There is also a larger diameter 62/36/2, think it is 0.022" PN 64-013,
on a 1.5 oz spool.
There's probably a better source for 62/36/2 solder than RS, but it's
decent stuff, unlike a lot of the things one finds there.
Jack
Don Wilhelm wrote:
> Jack,
>
> Thanks for that info, sounds like good solder - I was looking on their
> website and only saw the large diameter stuff listed even in the 2%
> silver alloy.
>
> Hurry to get some before it is gone - that is what close-out means,
> they do not intend to carry it forever.
>
> 73,
> Don W3FPR
>
> Jack Smith wrote:
>> Radio Shack has some very nice 2% silver 33%/65% 0.015" solder on 1.5
>> ounce rolls. I picked a couple of rolls up on a close out and it's
>> very nice stuff to use.
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
More information about the Elecraft
mailing list