[Elecraft] K2 Was Fine Now Dead?
JIMMY D HARRIS
ab0uk at msn.com
Thu May 24 20:57:55 EDT 2007
Allan,
The speaker leads are reversed comparing the basic K2 and the KPA100. If
they are wired the same one is wired wrong and can short the audio to
ground.
Jim, AB0UK
K2/100 s/n 4787
<K2 4670 with 100W and all options was working fine.
<Per the recommendation of Microham, I added a speaker jack from J5 to a
<stereo plug on the back of the case and now the unit will not power up on
<the KPA-100
<When I plug in power to the low power jack, the unit is OK, but will not go
<to high power.
<Any ideas?
<Allan Bacon
More information about the Elecraft
mailing list