[Elecraft] K2 and Linearamp UK 811

[Don Wilhelm]

Ian,

Check the voltage, current and polarity of the 811 amplifier PTT signal 
and compare those to the rating for the KPA100 maximum ratings.  If the 
811 amp requirements fall within the ratings of the KPA100 amp keying 
output, then just connect them together and run.

73,
Don W3FPR

Ian J Maude wrote:
> Hi all,
> I am looking to connect my K2 via the above amplifier.  The FR 
> connections are obvious, do I simply need to connect the Amp key out on 
> the back of the KPA100 to the PTT on the 811 or am I missing something?
> 
> Ian
>