[Elecraft] K2 frequency calibration

[Don Wilhelm]

Drew,

Yes, it is K2FCTR and is priced at $10.  Om the Elecraft website, click 
order and scroll down to 'Spare Parts and Mod Kits' (or something like 
that) - it will lead you to it.  Or, you can make a phone call to order it.

73,
Don W3FPR



drewko1 at verizon.net wrote:
> Is the freq counter probe assembly available from Elecraft? I bought a
> constructed K2 that doesn't have one included. I'm hoping I won't have
> to lookup and order the crimp pins, housing and rg174 coax from
> Mouser, etc. in order to make one up.
> 
> 73,
> Drew
> AF2Z
> 
> 
> 
> On Sat, 05 May 2007 21:24:46 -0700,  Vic K2VCO <vic at rakefet.com>
> wrote:
> 
>> Lowell wrote:
>>> Adjusting C22 to clalibrate the K2 frequency had absolutely no effect
>>> when using WWV or a frequency counter as reference.  I replaced C22,
>>> no change.  Continuity between C22 and U6 checks ok.  I suspicion a
>>> problem with U6.  Any comments?
>> C22 only has an effect when you run CAL PLL. See the procedure at 
>> <http://www.elecraft.com/Apps/K2%20C22%20Adjust%20App%20Note.pdf> for 
>> the best way to calibrate the reference oscillator.
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
>