[Elecraft] K3 inside photo

[Brett gazdzinski]

Where are all the parts??
Sure seems like a lot of ROOM in there!

thanks for the pix!

Brett


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jeff Stai
> Sent: Tuesday, May 01, 2007 12:59 PM
> To: Elecraft
> Subject: [Elecraft] K3 inside photo
> 
> 
> Here's a photo I took of the inside of the K3 at Visalia. The 
> tour that follows is from memory, 
> sorry if I misremember.
> 
> http://twistedoak.typepad.com/stuff/k3inside.jpg
> 
> The front panel is at the top, and you can see four filters 
> for the main RX behind it. I don't know 
> what the two daughter boards are. Most of the main board 
> components are on the bottom side.
> 
> To the left where the toroids are, are the main RX bandpass 
> filter for the amateur bands.
> 
> My understanding is that the sub RX board fits on top of the 
> main RX - but I didn't see that board.
> 
> Center back is the heat sink for the 100W amp.
> 
> Left back is the KAT3 tuner.
> 
> enjoy! - jeff wk6i
> 
> -- 
> Jeff Stai               jds at twistedoak.com
> Twisted Oak Winery      http://www.twistedoak.com/
> Winery Blog             http://www.elbloggotorcido.com/
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>