[Elecraft] KAT100 & K2

[Tom Arntzen]

Hi David!
In the basic K2 you need the KIO2 to interface the K2 with the KAT100.
That interface is a part of KPA100 , so in your case I would build the 
KPA100 first.
That will give you the opportunity to test all aspects of the KAT100.
You will be able to see how it switch between ho/lo power settings eg. 
10watts is the triggerpoint.

73 de LA1PHA

----- Original Message ----- 
From: "David Wilburn" <dave.wilburn at verizon.net>
To: "Elecraft Discussion List" <elecraft at mailman.qth.net>
Sent: Sunday, April 01, 2007 2:24 AM
Subject: [Elecraft] KAT100 & K2


> Just starting to get motivated again after building the K2.  Have the 
> KPA100, and KAT100 here.  I decided to build the KAT100 now, and come back 
> to the amp.  It says in the front of the manual that it will work with the 
> basic K2.  Just wanted to confirm, and make sure that was the case, or if 
> I needed anything extra to make it work.  I do not have any of the extra 
> boards at this time, just the basic K2.  Thanks.
> -- 
>
> David Wilburn
> dave.wilburn at verizon.net
> K4DGW
> K2 #5982
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 268.18.23/740 - Release Date: 
> 30.03.2007 13:15
>
>

--------------------------------------------------------------------------------
Jeg bruker gratisversjonen av SPAMfighter.
Den har inntil videre fjernet 73 spamposter.
Privatbrukere får SPAMfighter gratis!
Prøv gratis SPAMfighter PRO her.