[Elecraft] K2- frequencies

[Tom Hammond]

Nick:

>Thanks for replies to my problem with filters - now sorted and I can 
>hear the same signal on all filter settings!
>
>Got watts coming out the back but no QSOs - I find that the transmit 
>freq is more than 1 KHz lower than receive (which is about 2 KHz 
>lower than the digital display. Can't find anything on the site to 
>help but yet again sure I am doing something stupid.

Sounds as though there's still(!) an XFIL/BFO alignment problem.

1) Confirm that RIT (or XIT) has not been enabled.

2) What SIDETONE tone (ST P) have you selected?

3) Please send me the CAL FIL DAC (or frequency) values you now
    have for both CWN and CW REV. AND the values for the filter
    CENTER FREQ. (or DAC value) for each bandwith you've chosen.

4) On what band did you perform the CAL FIL operation? If you did
    it on on 15M or above, you MUST INVERT the 'sense' of the side-
    bands... e.g. CWN XFIL values will be ABOVE filter center
    instead of being BELOW, etc.  40M is probably the best band to
    use when performing CAL FIL.

Cheers,

Tom   N0SS