[Elecraft] FS Elecraft K2 plus KPA100

[Bill Scurlock]

> Hi.  My interests have changed and I am selling my K2 station which 
> consists
> of a complete K2 (s/n 549) plus the KPA100.  The top covers can be swapped 
> to either operate the conventional low power K2 with antenna tuner and 
> battery, or use the KPA100 for a 100 watt station.  I bought the station 
> used in 2004, upgraded the control board firmware to Rev. 2.04, upgraded 
> the I/O controller firmware to Rev. 1.09, performed the K2KEYMDKT 
> modification, and added the K6XX SMD CW tuning indicator and an MD2 
> Elecraft Microphone. No problems have been experienced with this 
> equipment, and it is still operating properly as far as I can determine.
>
> The basic K2 station was upgraded by the original owner from Rev. A to 
> Rev. B, has the temperature compensated PLL upgrade, and comes complete 
> with the following options and equipment:  KAT2 (antenna tuner), KSB2 (SSB 
> Adapter), KNB2 (Noise Blanker), KIO2 (I/O Module), KPA100 (100 watt 
> Module), KDSP2 (DSP & Clock), K160RX (160M & 2nd RX Port), K6XX CW Tuning 
> Indicator, MD2 (Elecraft Mic), KBT2 (Internal Battery), RS232 Serial Data 
> Cable, and Yaesu FT-100 Tuning Knob (plus original knob).  All of the 
> original kit builder's documentation including owner's manuals, module 
> instructions, and upgrade instructions are included.  The original owner 
> sent this K2 station to Elecraft in July, 2003 for alignment, and they 
> included several upgrades which are also documented in a letter from Gary 
> Surrency.  The battery has been kept on charge and is in good condition. 
> The total price for this Elecraft K2 station is $1275 which includes 
> insured shipping to the lower 48 CONUS.  Payment by US Postal Money Order 
> only.
>
> If interested, please email me direct at k5gcw (at) sbcglobal (dot) net . 
> Photos are available if requested.  Thank you for your interest.
>
> 73, Bill, K5GCW
>