[Elecraft] finished with the k2 for now.

[David Wilburn]

By default it is 600 Hz.  That is the ST P setting in the menu.

David Wilburn
dave.wilburn at verizon.net
K4DGW
K2 #5982


Brett gazdzinski wrote:
> I re-did my filters tonight, made up a headphone adaptor,
> and did some tuning around after cleaning up the shack 
> from the rig building.
> I listened to 80 meters for about 1/2 an hour, the rig 
> seemed to be working very well, loads of signals on the air,
> and I went to send a V in an open spot and check the swr.
> That is when I found the antenna was not connected...
> 
> I am going to wait for the kat2 antenna tuner to arrive
> before I worry any more about power output problems.
> 
> One issue I have is the CW pitch. I had a mini QSO with the icom
> and the K2 seems to have a different offset, like 600 Hz
> difference, I corrected it with the K2 RIT.
> 
> What sets the offset in the K2?
> 
> Brett
> N2DTS
> 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>