[Elecraft] Resistor

[Don Wilhelm]

For the K2, 5k to 6k is a better value.  The 10k is typically used where 
the transceiver provides an 8 volt source - but the K2 provides 5 volts, 
  so the lower value is better.  The actual value is not critical.

73,
Don W3FPR

David Robertson wrote:
> Ken,
> 
>>From everything you read values from 5K Ohms to 10K is listed.
> 
> I use 10 K Ohms and it works very well with both an ICOM mike and the Hail headset sold by Elecraft.
> 
> 73
> Dave