[Elecraft] K2 Trimmers - Which flat side?

[David Wilburn]

To the best of my ability (e.g. memory) I put the shorter flat side 
along the flat side on the silk screen, and the long flat side against 
the long rounded side of the silk screen.  I just finished my rig over 
the weekend and aligned it without issue.

David Wilburn
dave.wilburn at verizon.net
K4DGW
K2 #5982


eKotz wrote:
> Folks,
> 
> I have successfully reached my K2 Assembly, Part III, pg. 65, trimmer 
> installation step.   The red marked trimmers were no problem identifying 
> the orientation.   It looks like the 30 pF trimmers are different than 
> were in the older kits and there is my difficulty: The 30pF trimmer caps 
> (C32, C34, C44 & C46) have two flat sides... a large flat and an 
> opposing small flat and my question is... which is the correct flat for 
> proper orientation?   --I did not find this in the archive... I may not 
> be phrasing my search properly.--
> 
> Thanks,
> Ed - AD7GR
> K2 6050
> 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>