[Elecraft] KPA100: Rev D manual to build Rev C kit?

[Mike Cizek W3MC]

I'm in the middle of building the KPA100 I bought last spring, and decided 
it best to build the board as is, then install the upgrade parts.   There 
are only 16 of them, so it shouldn't add too much time.   I built up to page 
28 in the manual, and am now waiting for the upgrade kits to arrive.  Also 
ordered one for an older K2/100.  GL.

73,

Mike Cizek  W3MC
w3mc at toad.net
FOC # 1739
HSC # 1849
----- Original Message ----- 
From: "LAMB, Dick and Judy" <rlamb at slamb.org>
To: <Elecraft at mailman.qth.net>
Sent: Sunday, 18 March, 2007 22:10
Subject: [Elecraft] KPA100: Rev D manual to build Rev C kit?


> I'm preparing to build a KPA100 from an old kit.  My board is marked Rev 
> B, and my manual is Rev C (with Dec 14, 2004 errata sheet).  My manual 
> seems to include all mods from the KPA100 Shield Upgrade and the 
> KPA100MODKT.  However, my manual does not include all of the changes from 
> the KPA100UPKT (Oct 21, 2006) Upgrade Instructions. I'm finding that 
> integrating these instructions into my manual is very tedious and I'm 
> concerned about making errors.  Is there any reason I can't assemble from 
> the latest (Rev D) manual?
> Thanks
> Dick, K0KK
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>