[Elecraft] Re Dedicated HF Digital Interface Port

[Bernard Gaffney, N8PVZ/QRP]

Hi,

  while I haven't tried this, why not run a plug-in
cable from the rear audio jack to a DPDT switch in a
small box, or even a pill bottle, or similar. Then,
run a cable from one side of the switch to your
soundcard interface, and the other side to a speaker
or phones. You could also do this from the front audio
jack, you'd just need a 3pole-double throw switch
(since the front is stereo). Then simply flip the
switch to whichever one you wanted audio to go to
(soundcard or speaker/phones).

  Seems to me this should work. Not as sophisticated
as a built in board, but in keeping w/the KISS
Principle.

      72 de N8PVZ
         ---bernie gaffney
 

--- elecraft-request at mailman.qth.net wrote:
> 
> After wearing out the front panel headphone
> connector (twice in 2 years....due to
> connecting/disconnecting the soundcard cable for HF
> digital modes) it has become quite obvious that I
> need a dedicated HF digital interface port for my 
> K2/100.
  <snip>
> 73,
> Tony L. (KJ5XF)
> 




 
____________________________________________________________________________________
It's here! Your new message!  
Get new email alerts with the free Yahoo! Toolbar.
http://tools.search.yahoo.com/toolbar/features/mail/