[Elecraft] Question from a newbie

[Bob Cunnings]

Then you are fortunate enough not to be subject to power line noise at
your QTH. Here I've had continuing problems with power line noise (a
raspy buzz) and the K2 noise blanker is very effective indeed.

Bob NW8L

On 3/10/07, Rich McCabe (IWH) <r.mccabe at iowawebhosting.com> wrote:
> I have had two K2's fully loaded. One with a 38xx serial and the other with
> a 44xx serial.
>
> Mine have never left the desk and I have yet to find any type of noise
> artificial or other that the NB works on. It's fun to build but in my
> opinion if you are looking for bang for the buck, that's not it.
>
> 73,
> Rich
> Kd0zv
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jeff Kinzli N6GQ
> Sent: Saturday, March 10, 2007 7:22 PM
> To: Elecraft Mail Posting
> Subject: Re: [Elecraft] Question from a newbie
>
> I have a K2 with DSP, and just last weekend added the KNB2 to the mix.
>
> So far, for the noise I have here, the DSP denoiser works much better
> than the KNB2. I've just been switching it in and out to see what
> affect it has, and so far haven't found much noise that it removes.
>
> I'm in a relatively quiet place though, so that might be it.
>
> As Bob said, it's cheap, and it's a kit you can build and install in
> about an hour or two, so why not!? :)
>
> 73,
>
> Jeff N6GQ
>
> On 3/10/07, Bob Tellefsen <n6wg at comcast.net> wrote:
> > Pete
> > It all depends on the type of noise you experience.
> > For some kinds of noise, the KNB2 works like magic.
> > For other kinds, it has no effect at all.  For some odd
> > noises, it sort of works.
> > Ultimately, it's a crap shoot.  It is an inexpensive option,
> > and I would add it as insurance for those times when
> > it does work.  I have it in both my K2s.
> > 73, Bob N6WG
> >
> > ----- Original Message -----
> > From: "B Peter Treml" <k8pt at chartermi.net>
> > To: <elecraft at mailman.qth.net>
> > Sent: Saturday, March 10, 2007 4:44 PM
> > Subject: [Elecraft] Question from a newbie
> >
> >
> > > I have come into possession of a K2/100 with the DSP filter (KDSP2) but
> > does
> > > not have the noise blanker (KNB2).
> > > Question: (1) Is the noise blanker a worthwhile purchase?
> > > Any thoughts would be appreciated.
> > > 73, Pete-K8PT
> > >
> > > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > B. Peter Treml                 k8pt at chartermi.net
> > > 725 W. Magnetic St.       www.qrz.com/k8pt
> > > Marquette, Mi. 49855
> > > USA
> > >
> > > _______________________________________________
> > > Elecraft mailing list
> > > Post to: Elecraft at mailman.qth.net
> > > You must be a subscriber to post to the list.
> > > Subscriber Info (Addr. Change, sub, unsub etc.):
> > >  http://mailman.qth.net/mailman/listinfo/elecraft
> > >
> > > Help: http://mailman.qth.net/subscribers.htm
> > > Elecraft web page: http://www.elecraft.com
> >
> > _______________________________________________
> > Elecraft mailing list
> > Post to: Elecraft at mailman.qth.net
> > You must be a subscriber to post to the list.
> > Subscriber Info (Addr. Change, sub, unsub etc.):
> >  http://mailman.qth.net/mailman/listinfo/elecraft
> >
> > Help: http://mailman.qth.net/subscribers.htm
> > Elecraft web page: http://www.elecraft.com
> >
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>