[Elecraft] HF Digital interface for the K2...

[Tom Hammond]

Don Wilhelm, W3FPR, offers a really nice fixed output interface for the K2.

However, it may NOT offer output of the CW SIDETONE, since that comes 
in on a different input port to the AF amp and is not currently 
sampled by the fixed output amp.

Contact Don at:  Don Wilhelm W3FPR <w3fpr at arrl.net>

73,

Tom Hammond   N0SS


At 11:18 AM 3/10/2007, Peter wrote:
>Hi
>
>A small audio amp. and you have fixed audio level at the back.
>
>http://www.pi4cc.nl/personal/pc2a/k2/
>
>Peter
>PC2A
>
>Tony Lyon schreef:
>>Jamie,
>>Thanks.... Being able to connect to the J5 connector looks like it 
>>will do the trick. I looked
>>in the K2 manual and I noticed that the J5 AF output is derived 
>>directly  from pins 4 and 5
>>of the NE602 product detector.
>>
>>So, my next question is:.
>>Does the NE602  have enough output drive to drive the AF input of a 
>>RigEXpert?
>>
>>73,
>>Tony Lyon (KJ5XF)
>>
>>
>>_______________________________________________
>>Elecraft mailing list
>>Post to: Elecraft at mailman.qth.net
>>You must be a subscriber to post to the list.
>>Subscriber Info (Addr. Change, sub, unsub etc.):
>>http://mailman.qth.net/mailman/listinfo/elecraft
>>Help: http://mailman.qth.net/subscribers.htm
>>Elecraft web page: http://www.elecraft.com
>>
>>
>
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com