[Elecraft] KX1 #1727 DEAD

[RC kc5wa]

Correction Gang!
The construction of KX1 #1727 
<http://www.kc5wa.us/kx1/1727.html> went really smooth 
all the way through the build. ALL the "checks" were 
well within spec's. It was even okay after adding the 
30m mod with superb RX  Power out was about 3watts. 
Then I built and installed the ATU during the alignment 
and test the first several checks on L0-L3, C0-C3, 
N0-N3 were okay! When I tried to calibrate the ATU 
"Nada". I noticed the PA was "HOT". So was my DL. the 
SWR reading was r9.9 Power was "P0.0". Now when 
checking the RX is dead. Audio (white noise)is there 
and strong so is side tone... Any Ideas where to look?
RC kc5wa