[Elecraft] KX1 #1727 DEAD

[RC kc5wa]

Gang!
The construction of KX1 #1727 
<http://www.kc5wa/kx1/1727.html> went really smooth all 
the way through the build. ALL the "checks" were well 
within spec's. It was even okay after adding the 30m 
mod with superb RX  Power out was about 3watts. Then I 
built and installed the ATU during the alignment and 
test the first several checks on L0-L3, C0-C3, N0-N3 
were okay! When I tried to calibrate the ATU "Nada". I 
noticed the PA was "HOT". So was my DL. the SWR reading 
was r9.9 Power was "P0.0". Now when checking the RX is 
dead. Audio (white noise)is there and strong so is side 
tone... Any Ideas where to look?
RC kc5wa