[Elecraft] XV50 Transverter Help

[Don Wilhelm]

Jamie,

If you are dealing with an XV50, you should not have an R39 installed. There
is no quiescent Current Adjustment for the XV50 - see the statement right
under the 'Part V - ...' title.

73,
Don W3FPR

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net]On Behalf Of James C. Hall, MD
> Sent: Sunday, March 04, 2007 6:57 PM
> To: Elecraft at mailman.qth.net
> Subject: [Elecraft] XV50 Transverter Help
>
>
> Hello:
>
>
>
> I'm in the process of aligning my transverter and I'm stuck on the RF PA
> quiescent current adjustment, where R39 is adjusted to 20 mV when
> keying the
> transverter. Before keying, I get 7 mV; after keying, no matter what
> position R39 is in, I get only 12 mV.
>
>
>
> There is no troubleshooting section in the manual. Could someone
> point me in
> the right direction ?
>
>
>
> Thanks and 73,
>
>
>
> Jamie  WB4YDL
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 268.18.7/710 - Release Date:
> 3/4/2007 1:58 PM
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.7/710 - Release Date: 3/4/2007
1:58 PM