[Elecraft] KPA100-1 - Redux

[KJ3D]

Additional thanks to Ron, David and Jesse,

Since I don't anticipate portable ops, I now think I will just install the
KPA100 in the main box.  

Again, thanks to all for clearing up some confusion on my part.

73,

Tom,kj3d



-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of KJ3D
Sent: Sunday, March 04, 2007 10:25 AM
To: w3fpr at arrl.net; Elecraft at mailman.qth.net
Subject: RE: [Elecraft] KPA100-1

Don, John & Gregg,

Thanks for taking the time to respond.  I think I will put the new stuff in
a EC2 enclosure and leave the QRP K2 alone - particularily since I already
have the KIO2 installed.  Seems that might eliminate some of the heating
isues as well.

72/73,

Tom, kj3d 

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Sunday, March 04, 2007 9:36 AM
To: KJ3D; Elecraft at mailman.qth.net
Subject: RE: [Elecraft] KPA100-1

Tom,

You existing KAT2 (and everything else in the QRP K2 top cover) is removed
and the KPA100 installs in place of it.

There is another option available to you - if you want to retain the QRP K2
for portable use, then mount the KAT100-2 and the KPA100 together in an
external EC2 enclosure.  That configuration does require the KIO2 in your
QRP K2, but it works well.  If you choose this configuration, your KAT2
stays in place but is automatically bypassed with the output routed to the
ANT1 connector.

If you want the KPA100 mounted on the K2 instead of externally, order the
KAT100-1 (the lower height enclosure is included).

The KAT100 can be located anywhere in the shack that your cable length to it
will allow.  The kit includes all cables and connectors except the coax to
the KAT100.  You need a control cable between the K2 and the KAT100, and
that same cable will become a 'Y' cable if you also wire the connector at
the K2 end with the cable for attaching to a computer serial port (that wire
is included too).

73,
Don W3FPR

> -----Original Message-----
>
> Good Morning Group,
>
> I think I may purchase the 100 watt hat and the KAT100-1 ATU in the 
> near future.  I have three questions.
>
> 1.  I hear talk of Y connectors, etc.  Will my two new kits contain 
> all the bits to hook up to my K2?
>
> 2.  Does my existing ATU stay in the circuit?
>
> 3.  Does the new ATU have to be physically located next to or beneith 
> the K2?  - can I place it - say a foot away?
>
> OK, 3 and a half questions.
>
> Thanks, es 72 (for now)
>
> Tom, kj3d
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.6/709 - Release Date: 3/3/2007
8:12 AM

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com