[Elecraft] K2 Help

[Don Wilhelm]

Frank,

You should be able to repair it yourself.  Use wire to repair the 
damaged traces - #30 wire-wrap wire works great for that purpose, but 
you can use whatever your have in a small gauge wire - if there is 
danger that the wire may contact other parts of the circuits, use 
insulated wire.

The schematic is a guide to show you 'which connects to what' - use it. 
  As long as everything is properly connected, it should work fine.

73,
Don W3FPR

Frank Baker wrote:
> Hello:
> I have K2 that has a Transverter board that with the traces messed up on 
> the RF path where the two RCA connectors connect to. The K2 no longer 
> receives a signal. Can anyone out there repair this transverter board 
> and K2?
> Thanks, Frank
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
>