[Elecraft] K2 build question

[Curt Milton]

Gary

all is well.  the K2 menu has dot and bar modes, so
you can set it up for either.  it will take a while to
find what all these settings are used for.  

(push menu and look thru something that abbreviates
s-meter by scrolling with the main tuning knob, then
HOLD the menu button until it jumps to the right, then
scroll thru options, then HOLD the menu button to
accept your setting).  

enjoy the build and pace yourself!  the HF bands
should only get better so don't rush and end up with
rework and troubleshooting.  

73, curt



--- Gary D Krause <n7hts at bresnan.net> wrote:

> I just completed the second alignment and test of
> the K2 and everything 
> checked out fine.  I noticed that only the leading
> bar is lit on the s-meter. 
>  In other words, if the signal strength is S-9 only
> that bar is lit and all 
> the others to the left are not.  I suspect that
> isn't normal however, I kind 
> of like it that way.  Is that normal?
> 
> Gary, N7HTS
> 
> 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
> 
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 



       
____________________________________________________________________________________
Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469