[Elecraft] RE: Low output power on SSB after BW mod
W6IZT
w6izt at bellsouth.net
Sun Jun 3 12:59:44 EDT 2007
Using an MH2 mic
-----Original Message-----
From: W6IZT [mailto:w6izt at bellsouth.net]
Sent: Sunday, June 03, 2007 12:33 PM
To: Elecraft at mailman.qth.net
Subject: Low output power on SSB after BW mod
I just performed the 2.4 KHz bandwidth mod. While the audio response is
better the output power is only 80-85 watts on SSB on normal voice peaks
with ssba set to 2 and ssbc set to 2. If I whistle loudly into the mic I
can get 100 watts out. On cw the radio puts out 100w or more on all bands.
This was not expected as the new filter should have less loss? Any ideas on
how I can get the SSB output up to 100 watts
Gregg
W6IZT
More information about the Elecraft
mailing list