[Elecraft] K3 Mic Pinout

[Don Wilhelm]

Dick,

It is the same as the 'Elecraft' mic pinout shown in the KSB2 manual. 
You can download it from the Elecraft website if you don't have a copy.

The bias resistor can be switched in or out via menu selections.

IIRC, the front and back panel jacks can be independent (one with bias 
set on, one without).

73,
Don W3FPR

Edward Dickinson III wrote:
> Does someone have a cut and paste copy of the K3 mic pinout that they can
> post?