[Elecraft] Change from KAT100 in EC2 to the mini-unit

[gehringc at charter.net]

> The EC1 enclosure is the same size as the K1.  The KAT100 will not fit 
> in it.  What Neal wants (I believe) is the enclosure that the 
> transverters and the KAT100 come in.  I have found no information on 
> this.  Forgive me if it is available.
> Ian J Maude G0VGS


Ian,
You are correct, I mis-spoke the EC-1 is the enclosure for the K1,  The KAT100-1 is the proper nomenclature for the smaller KAT-100 enclosure the part numbers I provided are listed in the KAT-100 Manual.  

73 Chuck G.