[Elecraft] RF Probe again

[Don Wilhelm]

Gary,

Turn your manual to the Troubleshooting Appendix - look at page 10 near 
the end and you will find the PLL and VCO circuits will provide you with 
some checks for your RF Probe.

73,
Don W3FPR

Gary Montalbine wrote:
> I have a RF probe. However I am not sure it is working. It did not seem 
> to work at the first test point I tried. Is there someplace in the K2 on 
> the receive side I could test it? My problem appears to be in the send 
> side. This obviously would eliminate some problems if it worked.
>