[Elecraft] Zero Beat WWV

[Leigh L Klotz, Jr.]

A variation on #1 is to start watching the S meter when you get really 
close, with AGC set to fast.  The response on the K2 seems to be quick 
enough that you can see if futter when you get with 10Hz and decide 
which is closest.  If you are lucky it won't flutter and will slowly 
ramp up and down, all at the difference frequency.
73,
Leigh/WA5ZNU
On Thu, 5 Jul 2007 5:54 pm, Don Wilhelm wrote:
> Joe,
>
> Let me see if I can help.  First I usually think of 'tuning WWV' rather 
> than 'zero-beating' just to keep my mind straight - I leave the Zero 
> Beat term reserved for CW use when you want to tune the desired signal 
> to match your sidetone pitch.
>
> Tune WWV in using LSB or USB because the K2 does not add an offset for 
> LSB and USB.  There are 3 ways of doing it:  1) Tune the carrier to an 
> audio frequency of zero (which you cannot really hear, but go as low as 
> you can) and refine it by tuning until the voice announcements sound 
> 'natural'.