[Elecraft] build time for KPA100

[Hisashi T Fujinaka]

I found the KPA to go pretty quickly after I got the proper wheel for my
Dremel. You're supposed to take the anodizing off the heat sink in
specific places, and going at hard anodizing with a piece of emery cloth
made me go nuts.

The dremel attachment (a tiny wire brush) was great for taking the paint
off of the case where grounding was needed as well.

On Thu, 25 Jan 2007, Don Wilhelm wrote:

> J,
>
> You will likely find the KPA100 build time about 1/2 ot that required for
> the K2.
>
> 73,
> Don W3FPR
>
>> -----Original Message-----
>>
>> Hey Folks, what's the approximate build time on a KPA100 compared to a
>> K2? I just finished K2 #5945 and am antsy to get the KPA100 on the air
>> ;)
>>
>> Also, wondering about the KDSP2 (looks quick) and KNB2 (also looks quick).
>>
>> Thanks,
>>
>> -J
>>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.17.10/651 - Release Date: 1/24/2007
> 6:48 PM
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

-- 
Hisashi T Fujinaka - htodd at twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte