[Elecraft] KAT100 won't TUNE

[Don Wilhelm]

Roger,

Did you set the ATU menu parameter to TUNE?
Can you cycle through the ATU menu 'Lx' and 'Cx' parameters and make each
relay click individually? See page 34 of the KAT100 manual).

73,
Don W3FPR

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net]On Behalf Of r opdebeke
> Sent: Tuesday, January 02, 2007 7:25 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] KAT100 won't TUNE
>
>
> Hi Group,
>
> I just build the KAT100-2 , after finishing the whole kit , I have the
> following problem.
> IT JUST WON't TUNE ..
>
> I Did inspect all the resistance tests twice .
> Checked all the components and the solderpoints.
>
> Rechecked the cable PC <--> k2 <--> KAT100.
>
> Aligning and test (P. 27 ) all OK
> SWR bridge Null Adjustment just Fine .
> Power Calibration all OK.
>
> so , the K2 is communicating to the KAT100 .
> The leds are responding to the ANT switch ( switching from ANT1 or ANT2 )
> Also the HI and LO leds work.
>
> I removed the KPA100 from the bare K2 (it has an KIO) and did the
> same test,
> nut NO Tuning !!
>
> Actually non of the SWR LEDS are lighting .
>
> Where do I start signaltracing and HOW . ??
>
> btw K2 5315, (2.04P 1.09 ) , KAT100 ( 1.05 )
>
> btw communication from PC to K2 is OK also the aux-comm of the
> KPA100 is OK.
>
> Roger
> OE6MSF
>
> _________________________________________________________________
> Express yourself instantly with MSN Messenger! Download today it's FREE!
> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.16.3/614 - Release Date:
> 1/2/2007 2:58 PM
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.3/614 - Release Date: 1/2/2007
2:58 PM