[Elecraft] Heil Traveler Dual Side headset with K2

[Michael Jensen]

Thanks Don comming back to me

Really there are no version. Heil Traveler headset should be a clear setup 
regarding mic. You can not select the element used there. It is what they 
call a IC element on all of them with no exception.

So i got the 8 pin Kenwood adapter with the belive that i could open the 
connector and add a foot switch. But as mentioned in first mail the conector 
was over-molded

But if you belive that they will provide me with a drawings over the pin out 
of there product at Heil, I will for sure try to send a mail.

Br.
OZ1BZJ
Michael


----- Original Message ----- 
From: "Don Wilhelm" <w3fpr at earthlink.net>
To: <mj at the-jensen-dk.net>; <elecraft at mailman.qth.net>
Sent: Tuesday, January 02, 2007 2:51 PM
Subject: RE: [Elecraft] Heil Traveler Dual Side headset with K2


> BR,
>
> The answer all depends on which version of the Heil mic you purchased and
> which adapter you purchased with it.
>
> Hiel builds mics with several types of elements, and those that are 
> intended
> for use with the Icom (iC suffix) usually work well with the K2, but do 
> need
> a resistor from the +5 volt line to another pin on the mic jack (usually 
> the
> AF pin).  The adapter type you purchased will determine how you are to 
> wire
> the K2 mic configuration header - i.e. if you purchased the adapter for
> Kenwood, wire the mic configuration header as shown in the KSB2 manual for
> Kenwood, if you purchased the Icom adapter, use the Icom configuration, 
> etc.
>
> If you do not know the mic element type so you can answer the resistor
> question, contact Heilsound mailto:info at heilsound.com - tell them the full
> mike designation number, your adapter number and that you will be using it
> with a K2 - you should receive an informed answer.
>
> 73,
> Don W3FPR
>
>> -----Original Message-----
>>
>>    I have got my self a =raveler Dual Side headset from Heil. Now there
>>    have  been=a  lot of talk about Heil headset and the =2 here and I
>>    was  there  for  hoping  that  some  one  might have exp=rience with
>>    this Headset as well.
>>
>>    Hav= e  any  one  had  success  in  using  this  headset  with
>>  K2<   /st1:place>.  Here i  am  mainly thinking on the mic. The
>> element here
>>    is= a  IC  designed to my understanding to give more output then the
>>    HC-4  a=nd  HC-5.  That gave me the believe that this will work well
>>    with K2 not havi=g the issues of not being able to drive the K2.
>>
>>    So  =I  have hook up the thing to the best of my understanding. That
>>    was  a  little=hard  work  as  either  I have been non successful in
>>    finding  the  connection  d=agram or pin out for the Headset on Heil
>>    homepage. So I have reversed engi=eered the adapter cable that I did
>>    buy  for  Kenwood.  The price was a connec=or as Heil, either in the
>>    believe  that  moisture  one  day  will  kill the conn=ctions in the
>>    adapter cable connector or to hide the connections, have ove=-molded
>>    the hole thing.
>>
>>    Now=he up, Down and PPT are working, but I have no audio. <=SPAN>
>>
>>    Wha=t  would be good to know are the pin-out of the connector on the
>>    headset  (no=t  the  adapter  cable),  and if any one are using this
>>    headset  and  if  they had=o make modifications to the Audio path to
>>    make it work.
>>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.16.1/611 - Release Date: 12/31/2006
> 12:47 PM
>
>
>

--------------------------------------------------------------------------------
Jeg beskyttes af den gratis SPAMfighter til privatbrugere.
Den har indtil videre sparet mig for at fa 251 spam-mails
Betalende brugere far ikke denne besked i deres e-mails.
Hent en gratis SPAMfighter her.