[Elecraft] Cal tPA trouble

[Don Wilhelm]

Les,

You may be wise to check the soldering on your KPA100 - it sounds like you
may have an unsoldered connection.  Check particularly around U1, R5, R6,
and Q3.

73,
Don W3FPR

> -----Original Message-----
>
> Hi there,
>
> I have just got around to building my KPA100 (to Appendix G -
> Rev. C-5) for
> my K2 (53 * * ), and thought that you may be interested in
> hearing about one
> problem which I encountered during the build.  When I went to CAL tPA, I
> found that the temperature reading was 'stuck' on 0 degrees C and
> wouldn't
> move for love nor money!  Anyway, I checked the circuit through and was
> convinced that I had a corrupted U1 Microcontroller, and was just
> about to
> call it a day and order a replacement when, with a frantic to and
> fro on the
> tuning dial, the digits suddenly re-appeared!!  CAL tPA was then carried
> out!  I just wondered if anyone else had come across this and what is/was
> the cure?, as I don't recall seeing anything in the archives,
> except for a
> similar problem, but being 'stuck' on the number 255.
>
> 73,
> Les  M0BSI
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.3/700 - Release Date: 2/24/2007
8:14 PM