[Elecraft] Dave Clark Microphone

[Don Wilhelm]

Rob,

If you can tell us what the functions of 3 wires are, then we should be able
to tell you how to connect it.
Pure speculation tells me that one is AF, another is ground and the third
may be either the voltage feed to the electret element or it may be the
audio to the headphone section, or it could be a PTT wire - but that is
strictly a guess based on my assumption of whatever might be included in the
set of 3.  In other words, a SWAG.

If the element is truly an electret type, it will likely work with the K2
just fine.

73,
Don W3FPR

> -----Original Message-----
>
> I have a query for the group. I am a pilot and have several Dave
> Clark H13.4 headsets with noise-cancelling electret microphones
> that terminate in a 3-wire connector. Can these microphones be
> configured to work with the K2?
> Rob
> KC6ROC  K2 #5924 in progress
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.441 / Virus Database: 268.18.3/699 - Release Date: 2/23/2007
1:26 PM