[Elecraft] K2/100 - voltage drop across DC cable - PROBLEM SOLVED

[Don Wilhelm]

Glenn,

If you continue to have problems with the fuse contacts oxidizing, consider
replacing the fuseholder with ann automotive ATO type in-line fuse.  Those
ATO fuseholders generally have a tighter 'grip' on the fuse legs which
creats a lower resistance than the spring loaded end contact type.

73,
Don W3FPR

> -----Original Message-----
>
> Ron, you were right on the money: oxidized contacts.
> So there is no need to reflow any soldered connections here, just
> cleaning
> some contacts cured the problem. Running full power (now up to 115 watts)
> now yields a voltage of 13.7 volts across the K2's input
> terminals. Voltage
> at RX is 14.2 volts.
> Thanks also to Tom N0SS for the comparison with larger gauge cable.
>
> This reflector really adds to the "Elecraft experience".
>
> 73 and thanks again!
>
> Glenn ON4WIX/OR4W
> K2/100 s/n 5361
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.441 / Virus Database: 268.18.3/697 - Release Date: 2/22/2007
11:55 AM