[Elecraft] K2 #6014 almost first pwr test

[glblock at mchsi.com]

Finished the Front Panel, Control Panel, and first part of RF Board ready for
the tests.  Assembled and find I used the short spacers on the Front Panel so
gotta correct that.  Resistance checks show no shorts.  Bought a 10X loupe and
checked all solder joints for bad ones and touched up any I found. (two)

Will fix spacers and apply power for the first time to do initial tests tomorrow
nite when I'm fresh.

It sure looks purty sittin' on the desk though.  Also built a portable ant for
it that is simular to the buddiwhip.

nite all.  and hopin for no smoke.