[Elecraft] KDSP2

[wd4lst at windstream.net]

Don,
Will do, tonight.
Thanks for the prodding,
-Pete
> 
> From: "Don Wilhelm" <w3fpr at earthlink.net>

> Cut about 1/8 inch off those long KDSP2 pins - do it now.  The only long
> pins are on the double row header side.
> 
> If you forget to do it and install the KPA100, the shield will contact the
> KDSP2 and cause damage.
> 
> 73,
> Don W3FPR
> 
> > -----Original Message-----
> > I did notice the header pins on the dspx are a little long on the
> > 2x10 header, as mentioned recently on the reflector.
> > I will remedy that next time I open the lid, as I am now starting
> > a KPA100 (courtesy of the gang at booth 60 again)
> > 73s,
> > Pete
> > wd4lst
> > K2 5813
> > K1 2194
> >
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.441 / Virus Database: 268.17.37/682 - Release Date: 2/12/2007
> 1:23 PM
> 
>