[Elecraft] KDSP2

[Don Wilhelm]

Pete,

Congratulations on the KDSP2 success.

Cut about 1/8 inch off those long KDSP2 pins - do it now.  The only long
pins are on the double row header side.

If you forget to do it and install the KPA100, the shield will contact the
KDSP2 and cause damage.

73,
Don W3FPR

> -----Original Message-----
> I did notice the header pins on the dspx are a little long on the
> 2x10 header, as mentioned recently on the reflector.
> I will remedy that next time I open the lid, as I am now starting
> a KPA100 (courtesy of the gang at booth 60 again)
> 73s,
> Pete
> wd4lst
> K2 5813
> K1 2194
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.441 / Virus Database: 268.17.37/682 - Release Date: 2/12/2007
1:23 PM