[Elecraft] K2 50975 finished

[Jesus L. Paleo]

Jesus L. Paleo wrote:
> I am happy, my K2 is ready to his first qso, just waiting by a decent 
> antenna, now receive signals in DX 80m band.
>
> Just one BFO setting question. This is a only cw K2, no ssb module 
> pluged, all the setting are fine but in USB the bfo at Call Fill can 
> not  get a frequency as in other modes, in cw, cwr and lsb all go fine 
> with the BFO call, but not at usb, is this a fail or can i ignore it ?
>
>
> Regards and hope a can be for a little time at ARRL contest, just to 
> check this fine rtx.
>
> Jesus, EA1DAV
> k2 50975
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
I think i have solved the problem. The cause seem to be the coil 
toroidal in the botton. When the botton cover is instaled, the upper and 
lower limits in the firsts BFO adjusts fail in the upper limit, the bfo 
is unstable at upper limit. If the botton cover is not instaled it work 
fine. I add a more long separator, only a bit longer than the one 
supplied with tha kit and tha interaction of cover over the BFO coil is 
now aceptable and upper and lower limist meet specifications as manual 
say. I do Call Fill again and it adjust as expected.

Thanks by the help.

Jesus, EA1DAV.