[Elecraft] KFL1-2 Band Choices

[Don Wilhelm]

That information source is incorrect.

The 2 band boards can be built for any 2 bands.

The 4 band boards OTOH, share components between 2 adjacent bands, so only
40/30 meters and 20/(17 or 15) meters may be used on the 4 band board.  Yes,
either of the band pairs on the 4 band board could be changed to another
band, but then it would only be usable as a 3 band board because the LPF
sharing will not allow differnet band combinations (i.e. 80 and 40 meters
cannot share a single low pass filter).

73,
Don W3FPR

> -----Original Message-----
>
> Could someone help clear something up for me?
>
> Are there any band choices on the KFL1-2 that are not compatible with
> each other?  I can't find anything in the documentation that says
> otherwise.  On my last K1, I had 40 and 80 meters on the same board.
> It worked fine and I had no problems.  Now someone is telling me that
> this combination shouldn't have worked and that only 80 & 15 can be
> put on the same board.
>
> Could someone help clear this up for me?  I am contemplating another
> K1 but use 40 & 80 meters almost exclusively and want this combination
> in the rig.
>
> Thanks and 72
>
> --
>  JT Croteau, W6FO/1 - Manchester, NH
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.17.19/663 - Release Date: 2/1/2007
2:28 PM